Club Touareg Forum banner

P0302 after ERG cooler and oil cooler replacement

1.7K views 6 replies 4 participants last post by  volkswagens-for-life  
#1 ·
Just got the 2013 TDI back from the dealer who replaced the EGR cooler and the oil cooler. Right after that, a P0302 code started and there was a hesitation sometimes on acceleration. Does the replacement procedure require the fuel lines to come off? Trying to track done what happened, as the code is new after the service.
 
#5 ·
That's what I needed to know. I saw in the picture the dealer sent with the intake off and the top of what looked like an injector when pointing out the coolant leak, but as I haven't had this one very long, and the first V6 TDI, I haven't worked around everything on it yet. Most of the experience is on the I4, ALH, CJAA, and CVCA. The other Touareg is the BWF, so not much useful information carryover there.
 
#7 ·
Extremely complicated vehicles. They often trigger codes for things further down the line which makes it complicated to diagnose