Hello,
I spoke to couple of members on here who would be willing to help me with some VAG-COM mods but it was suggested that I gather the instructions for what I want done just in case.
It is for a 2006 V6 3.2L
Here is what I want done:
1. NA Trailer
2. ROW tranny
3. Wipers to regular intermittent
4. Lane change blinkers from 3 to 5
5. Six light salute
6. DRL in MFI
I have instructions for the last two (copied from the sticky) but cannot find anything on the others.
To put the DRL into the MFI menu as an option:
1) start VAG-COM
2) click: “select control module” button
3) in Direct Entry box type: 09 (Elect. Ctrl)
4) click: RECODE 07 (Recode)
5) In the Software Coding box should be a number (mine was) 0105695, Subtract 1 from the existing coding (my new number is 0105694).
6) click: DO IT.
7) click: close controller, go back
click: go back
To make the halogen passing beams come on with the high beams on Touaregs equipped with Xenon lights: Please note that the fog lights will also stay on with the high beams if you have the fog lights turned on while driving.
1) start VAG-COM
2) click: “select control module” button
3) in Direct Entry box type: 09 (Elect. Ctrl)
4) click: RECODE 07 (Recode)
5) In the Software Coding box should be a number (mine was) 0105695, Subtract 2 from the existing coding (my new number is 0105693).
6) click: DO IT.
7) click: close controller, go back
click: go back
If you could post them here I would greatly appreciate it.
TIA
I spoke to couple of members on here who would be willing to help me with some VAG-COM mods but it was suggested that I gather the instructions for what I want done just in case.
It is for a 2006 V6 3.2L
Here is what I want done:
1. NA Trailer
2. ROW tranny
3. Wipers to regular intermittent
4. Lane change blinkers from 3 to 5
5. Six light salute
6. DRL in MFI
I have instructions for the last two (copied from the sticky) but cannot find anything on the others.
To put the DRL into the MFI menu as an option:
1) start VAG-COM
2) click: “select control module” button
3) in Direct Entry box type: 09 (Elect. Ctrl)
4) click: RECODE 07 (Recode)
5) In the Software Coding box should be a number (mine was) 0105695, Subtract 1 from the existing coding (my new number is 0105694).
6) click: DO IT.
7) click: close controller, go back
click: go back
To make the halogen passing beams come on with the high beams on Touaregs equipped with Xenon lights: Please note that the fog lights will also stay on with the high beams if you have the fog lights turned on while driving.
1) start VAG-COM
2) click: “select control module” button
3) in Direct Entry box type: 09 (Elect. Ctrl)
4) click: RECODE 07 (Recode)
5) In the Software Coding box should be a number (mine was) 0105695, Subtract 2 from the existing coding (my new number is 0105693).
6) click: DO IT.
7) click: close controller, go back
click: go back
If you could post them here I would greatly appreciate it.
TIA