[4VW'S]

Put new brake pads Turned rotors myself no sign of warped rotors.
Dialed in with light touch and cut 2 thousand on both sides no hi or low.
Now have wobble.
4200 ammco no new style adapter's chucked and turned striaght.

 

[TommiT]

You should not be turning rotors. There is only 1mm wear on each side before they are undersize and out of service.

 

[redbarron55]

By wobble do you mean the tires or something with the brakes?
If you have a wobble perhaps you did not get the discs seated or the wheels are not seated.
Is this a T3 with possible steering wheel shake problems if the wheels were not installed per the TSB?
By the way that 1 MM is about 0.040" so the question is what is the total removed?
Front rotors new 32mm rear 28mm with a 2 mm wear limit or a little less than 0.080" from 1.259" front and 1.10" rear.
Wear limit front - 1.181"
Wear limit rear - 1.02"
If the discs were machined true with the center of the hub there must be some other problem existing.