Club Touareg Forum banner
Cancel
Create thread New Garage Forums

Adding Keyless go to a T3 Works!

Jump to Latest
1 - 20 of 50 Posts

eddiedellz

· Registered
Joined
·
24 Posts
Discussion starter · #1 ·
I just got keyless go to work in my 2011! I will work on a write-up soon. Bare bones you would need parts wise..
  1. Keyless go key coded to the car
  2. 2 access start antenna's and connector's
  3. Start Stop switch and connector
The Coding to the Access start module has to be changed and tada! car starts :)

next thing for me would be to add the antenna to the door and the door handle with the sensor. more info and details to come soon!
 
#6 ·
Congratulations on figuring this out.

If you don't mind me asking, did you purchase any parts from me to do this? I ask because I am wondering whether I should be expecting a rush one some specific parts from T3 owners who might want to do this mod themselves. Or perhaps I should even offer specific parts as a kit for this.

eddiedellz said:
I just got keyless go to work in my 2011! I will work on a write-up soon. Bare bones you would need parts wise..
  1. Keyless go key coded to the car
  2. 2 access start antenna's and connector's
  3. Start Stop switch and connector
The Coding to the Access start module has to be changed and tada! car starts :)

next thing for me would be to add the antenna to the door and the door handle with the sensor. more info and details to come soon!
Click to expand...
 
Discussion starter · #10 ·
spockcat said:
Congratulations on figuring this out.

If you don't mind me asking, did you purchase any parts from me to do this? I ask because I am wondering whether I should be expecting a rush one some specific parts from T3 owners who might want to do this mod themselves. Or perhaps I should even offer specific parts as a kit for this.
Click to expand...
Its all T3 specific . I was actually thinking about putting together my own kits
 
#14 ·
eddiedellz said:
Its all T3 specific . I was actually thinking about putting together my own kits
Click to expand...

No problem. Good luck with it. Just let me know if you need any help with parts access. I get my parts directly from Germany. Some of the parts aren't available here and those that are available here cost less there. I also have a good setup to make specific wiring harnesses. I actually still make keyless start harnesses for the Phaeton keyless start.
 
Discussion starter · #15 ·
Before you have your key proggramed to your car you need to change the Access start module codeing to Keyless go

You will need a new Remote key from the VW dealer. The key Has to be a keyless go key vin coded to your car the part number for my 2011 was 7P6-959-754-AG-IRZ Ordering a key by your vin will not work as a keyless go key. You can email me for any questions on this.

New Remote Key $153 + programming fee obtained from your local dealer they ussaly charge $110 you can prob get them down to $75

New Trim for center concole with hole for Start stop button - You can cut the hole with a hole saw if your carefull but I take no responsibilty if you damage your original trim
Start Stop Button
4 Access Start Anttenas
Drivers Side Door handle and bracket - Handle needs to be painted I only went with the drivers side
Harness for kessy

you can order whole kits from me for:

Without Center concole trim - $774 - without key from dealer & only driver side handle
With $1054 - without key from dealer & only driver side handle

Without Center concole trim - $1126 - without key from dealer & Both side door handles
With $1456 - without key from dealer & Both side door handles

Installation intructions to follow in a day or two
 
Discussion starter · #16 ·
Before you have your key proggramed to your car you need to change the Access start module codeing to Keyless go


In Vag-Com go to 05- Access Start Module
then change codeing

My Original Coding was 0x09860000000000000000 I changed the 9 to D now my coding is 0x0D860000000000000000

You have to do this before you have your new keyless go keys programed to your car
 
#17 ·
Will a 13 include any of the KESSY parts or is it the same as an 11?


thanks

eddiedellz said:
Before you have your key proggramed to your car you need to change the Access start module codeing to Keyless go

You will need a new Remote key from the VW dealer. The key Has to be a keyless go key vin coded to your car the part number for my 2011 was 7P6-959-754-AG-IRZ Ordering a key by your vin will not work as a keyless go key. You can email me for any questions on this.

New Remote Key $153 + programming fee obtained from your local dealer they ussaly charge $110 you can prob get them down to $75

New Trim for center concole with hole for Start stop button - You can cut the hole with a hole saw if your carefull but I take no responsibilty if you damage your original trim
Start Stop Button
4 Access Start Anttenas
Drivers Side Door handle and bracket - Handle needs to be painted I only went with the drivers side
Harness for kessy

you can order whole kits from me for:

Without Center concole trim - $774 - without key from dealer & only driver side handle
With $1054 - without key from dealer & only driver side handle

Without Center concole trim - $1126 - without key from dealer & Both side door handles
With $1456 - without key from dealer & Both side door handles

Installation intructions to follow in a day or two
Click to expand...
 
1 - 20 of 50 Posts
About this Discussion
49 Replies
18 Participants
Last post:
damazval
Club Touareg Forum
posts
784K
members
105K
Since
2003
Club Touareg Forum is a forum community dedicated to Volkswagen Touareg owners and enthusiasts. Come join the discussion about VW Touareg Sport Utility Vehicles and more!
Full Forum Listing
Explore Our Forums
General Maintenance & Repair Australia & New Zealand Brakes, Steering, Suspension, Wheels and Tires Mobile Electronics and In Car Entertainment General Touareg Discussions