Club Touareg Forum banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
10,219 Posts
20x10 fits perfectly fine. 20x11 fits fine in the back as well.

I run 20x10 and have run 20x10 front/20x11 rear staggered setup in the past.

its not even close to rubbing....recall that the cayenne turbo with the same wheel wells fits 21 x 10
 

·
Premium Member
Joined
·
10,219 Posts
Stock in 20X9 is et60. So I am thinking 20X10 et50.
ET50 works. Any wheel made for a Cayenne/Q7/Touareg will work. The are all unique in that they are the only wheels that have the bolt pattern (5x130) center bore (71.6mm) and load rating combo out there. Watch out for Porsche wheels that are made for Porsche cars...they fit, but don't have the load rating.
 

·
Premium Member
Joined
·
10,219 Posts
Careful - he's got a T2 not a T3. I think the T2 wells are a little tighter than T3, especially on the TDI with the intercooler vents. If you get 20x10 and they are tight, spacers should solve the problem....
There is no problem on any Touareg with 20x10. The intercooler vents are only a problem if you're trying to run larger than OEM diameter tires. The offload guys trying to put mud bogger tires on there encounter this problem.
 

·
Premium Member
Joined
·
10,219 Posts
Well they cannot do the bolt pattern on these so I am looking for something else. Disappointed big time but they will fit my audi allroad in an 18 so thats a plus!
Try Victor Equipment for wheels that fit well , at a price that won't break the bank.

if you're feeling rich go with HRE.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top