Club Touareg Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
770 Posts
Trying to finish out the install.... anyone know the correct coding for a '13 Exec to add a heated steering wheel with paddles?


Also an image. I think this may be a later steering wheel as it is smaller in diameter and not as thick, with the white backlight. Almost looks like a Jetta wheel with Touareg buttons and heat... Any thoughts?
 

Attachments

·
Registered
Joined
·
770 Posts
OK I tried 000CFD. No Luck. Paddles work but no heat.


I also tried 000035 same thing Paddles but no heat.


Originally it was 000C15


Any other ideas?




Also somehow even with 000C15 coded, the left and right switches are not working properly. The left side switches control the right side functions. Right side switches appear disabled (no backlight). Is it possible one of the codes above bricked a module?
 

·
Registered
Joined
·
770 Posts
Yes. I have a '13 Exec which had heated steering wheel from factory. The wheel I think is from a '15 and newer though. I found out that the RNS-850 from the '11-'14 is different than '15 to '18. So could be that.


heat works as is (no paddles) with 000C15 coded. Paddles worked with 000035 and 000CFD but no heat. I'll try swapping modules next.
 
1 - 4 of 4 Posts
Top