[bamboo]

heated Steering Wheel coding

hi Guys :smile2:

Today I mounted a heated steering wheel without paddles and replaced the clock spring.
Power and ground cables (PIN 2 & 1) are connected to SB11 (10A) fuse.

Now I have a problem with the coding.
I use vag com and do not have a long coding helper :-(

The steering wheel module 16 I encoded with 0000C15. That should be true. OEM was 000015.

But what else needs to be coded so that the heat button is displayed in the RNS850?

Can someone help?! Thanks in advance...

Greetings Marco

 

[bamboo]

Many thanks for the information.
Today I encoded the HVAC and the steering wheel heating works.

Bit 7 of byte 1 must be set to 1.

wish a nice weekend :wink2: