[casioqv]

After more analysis, It is clear that the Eurowise kit it pushes the upper A-arm out more than what can be corrected with the eccentric and an adjustable A-arm is required with this product.

I have the Eurowise 2.5" kit, with the 0.5" subframe drop on my '09 and was able to get it fully aligned to spec.

It really sounds to me like your subframe just got shifted off center, probably from a hard impact offroad. I'd probably do centering pins like others suggested if I were you- I wish I had thought to buy some for mine.

 

[casioqv]

the 1" lift kit puts the spacers on top of the A-arm mount, the A-arm angle remains unchanged at ~0 degrees horizontal (good), but because the top of the upper A-arm mount is angled at ~28 degrees, the 1" spacers push the A-arm ~12mm outboard. This puts the wheel in a 1 positive camber which is not always correctable.

Interesting... I had assumed it was the same but with a smaller spacer.