for anyone interested I was able to get it to code correctly in my 2015 STOCK LED Tail light with zero errors, and the correct taillight brightness. I used a euro headlight switch and the updated Euro rear LED fog light. wire was run to the Black plug on the J393 module, open slot number 12.

Coding is as follows:
As always, save your stock coding just in case.. cause I'm not liable for your car lol.. but it works in mine.
195: 20488
196: 3068
197: 2819
198: 2851
199: 20488
200: 20520
201: 20488
202: 20520
203: 9
204: 0
205: 13
206: 45
207: 51209
208: 0
209: 0
211: 51214
212: 15
213: 12336

 

for anyone interested I was able to get it to code correctly in my 2015 STOCK LED Tail light with zero errors, and the correct taillight brightness. I used a euro headlight switch and the updated Euro rear LED fog light. wire was run to the Black plug on the J393 module, open slot number 12.

Coding is as follows:
As always, save your stock coding just in case.. cause I'm not liable for your car lol.. but it works in mine.
195: 20488
196: 3068
197: 2819
198: 2851
199: 20488
200: 20520
201: 20488
202: 20520
203: 9
204: 0
205: 13
206: 45
207: 51209
208: 0
209: 0
211: 51214
212: 15
213: 12336

Where did you get the fog lights from and In order to make it work you had to change the light switch to a 2015 ? I currently own a 2012

 

Thanks for this. By the "updated Euro rear LED fog light" do you mean a new housing is needed in place of the one on the car, or merely that a LED lamp needs to be fitted into the location in the housing that was North America fitted on the vehicle when new? I want to make this work correctly.

 

You need to replace the left bumper relfector/light assembly, as the NAR one does not have the provision for a lamp.

 

Looks like this.

Sent from my HD1907 using Tapatalk

 

I'm not sure of the year on my switch. It is red led though, not the normal interior white. So either that's a Euro thing, or the year on the switch is wrong

The fog light itself I found on ebay

Sent from my HD1907 using Tapatalk