[kpierce1986]

Like the title says, 75% off in stock wheels. Picked up a set of 19" Catania's for under $400 shipped to my door. Really wanted 18s but at that price I couldn't resist.

RF Series Wheels

We use the latest rotary formed construction technology to produce a performance wheel that is lighter and stronger than a comparable alloy wheel. We offer a mix of contemporary designs and fitments well-suited for a variety of sports and luxury cars. Available in finishes such as Satin Black...

momo.com

 

[New2Tregs]

Looks like they have some good deals but any of the ones I'd put on my Treg they don't offer them in the correct bolt pattern.

 

[SaVAGeSoot]

Picked up a set of 19" Catania's for under $400 shipped to my door.

Did you get new bolts?

 

[kpierce1986]

Did you get new bolts?

I haven't ordered them yet. I'll need new bolts and new tpms sensors as well.

 

[SaVAGeSoot]

Don't forget the hubcentric rings.

 

[qurtuba]

Is the offset ok for a Touareg with 19" wheels? It says the catania wheels come with an offset of +48, but when I did a search for Touareg 19" wheel specs I found that it should be +60 (Volkswagen Touareg 2009 - Wheel & Tire Sizes, PCD, Offset and Rims specs)

 

[SaVAGeSoot]

Without knowing the width of the rim, you can't talk about offset.

 

[kpierce1986]

Is the offset ok for a Touareg with 19" wheels? It says the catania wheels come with an offset of +48, but when I did a search for Touareg 19" wheel specs I found that it should be +60 (Volkswagen Touareg 2009 - Wheel & Tire Sizes, PCD, Offset and Rims specs)

I had seen a previous post from someone with a 3rd gen running the Catanias and they looked great. He said he used his same lug nuts from his oem wheels and didn't change anything else. Not sure what the difference would be with a T2.

 

[qurtuba]

Without knowing the width of the rim, you can't talk about offset.

It says the width of the rim is 9" and the bolt pattern is 5x130 (which is correct for a T2).

 

[SaVAGeSoot]

It says the width of the rim is 9" and the bolt pattern is 5x130 (which is correct for a T2).

So if you're keeping the same width as OEM and reducing the offset by 12mm, what do you think the result will be?

 

[MidnightTouaregV8]

Hella flush ...

 

[qurtuba]

So if you're keeping the same width as OEM and reducing the offset by 12mm, what do you think the result will be?

Aha! so that's how it works, then. 😃

 

[SaVAGeSoot]

Aha! so that's how it works, then. 😃

So they will poke out 12mm compared to OEM setup... or flush AF according to some