Thought I would spend the afternoon tinkering with VCDS and try to enable DVD, DVB-T, DAB/HD Radio, TV, Lane Change and a few other features, that looked interesting to enable.
I foolishly did not capture my original settings before going and changing various settings
I read somewhere that if you enable a feature that you do not have, then it will be ignored.
As I have the top of the line Aust model, I though I should have every feature, with some disabled.
After changing numerous settings that looked related, I did a scan using VCDS and it found the following 4 new mulfunctions:
08-Auto HVAC -- Status: Malfunction 0010
34-Level Control -- Status: Malfunction 0010
55-Headlight Range -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
View attachment Scan 1.txt
I changed some setting back and have managed to clear the first two malfunctions (08, 34), but cannot seem to clear the remaining two (55, 5F):
55-Headlight Range -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
View attachment Scan 2.txt
What is the easiest way to revert back to factory settings for the modules that are malfunctioning? I expect that I will need to revert back to MY15 Australian delivery spec.
Also, I could not change some of the setting using "Adaptation" as they required a "Security Access Code". I do not have this code. Can someone please provide the Security Code for a T4 Touareg?
I would like to clear the newly introduced faults before taking it back to the dealer to look at the Auto Dist Reg & CAN Gateway Fault that I initially had when I picked the new car up.
13-Auto Dist. Reg -- Status: Malfunction 0010
19-CAN Gateway -- Status: Malfunction 0010
Any assistance would be greatly appreciated.
I foolishly did not capture my original settings before going and changing various settings
I read somewhere that if you enable a feature that you do not have, then it will be ignored.
As I have the top of the line Aust model, I though I should have every feature, with some disabled.
After changing numerous settings that looked related, I did a scan using VCDS and it found the following 4 new mulfunctions:
08-Auto HVAC -- Status: Malfunction 0010
34-Level Control -- Status: Malfunction 0010
55-Headlight Range -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
View attachment Scan 1.txt
I changed some setting back and have managed to clear the first two malfunctions (08, 34), but cannot seem to clear the remaining two (55, 5F):
55-Headlight Range -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
View attachment Scan 2.txt
What is the easiest way to revert back to factory settings for the modules that are malfunctioning? I expect that I will need to revert back to MY15 Australian delivery spec.
Also, I could not change some of the setting using "Adaptation" as they required a "Security Access Code". I do not have this code. Can someone please provide the Security Code for a T4 Touareg?
I would like to clear the newly introduced faults before taking it back to the dealer to look at the Auto Dist Reg & CAN Gateway Fault that I initially had when I picked the new car up.
13-Auto Dist. Reg -- Status: Malfunction 0010
19-CAN Gateway -- Status: Malfunction 0010
Any assistance would be greatly appreciated.
