Club Touareg Forum banner
1 - 2 of 2 Posts

· Registered
2005 V8 w/air
Joined
·
20 Posts
What the hell you supposed to do when that damn headlight removal/retaining thingy is broken and you need to get the light out ?!!💢
This was left broken for me by the last owner :???:
View attachment 142666

I'd been putting this problem off for quite some time, as all the lights worked anyway, so there was no reason to remove the headlight unit. But the inevitable happened, the parking light in the outside corner of the headlight unit blew, and I got sick of the car screaming at me every time I started it :mad:

So I finally decided to fix this problem, but really had no luck with trying to turn the gear, on the end of the shaft that locks the headlight in place, there's just no room to get anything decent on the end of the gear, even vice grips were just slipping. I really didn't envy the thought of removing the front bumper, and what ever else, just to get to the headlight, for the sake of a $2.00 globe.

so I tried something different, with excellent results. :)
I pulled the other headlight out (which works fine, thankfully ) to have a look at how the locking mechanism worked, and I figured if I could get something long and thin to fit between the bottom of the light and the mounting tray, I might be able to unclip the lock that holds the light in place. so I fashioned a piece of aluminium with a wedge shape at one end and marked the approximate length to reach the lock.
View attachment 142674
View attachment 142682
View attachment 142690
View attachment 142698
It took quite a bit of playing around to finally find the lock and get it to release, because your trying to work blind, but using the other light as a guide I got the right spot.
So I now had the light released, but the damn thing wasn't going to come out that easy, there was a whole bunch of crud jamming up the catch that stops the light sliding out of the tray, so some more struggling and I finally got it free
View attachment 142626
So after finally getting the light out of the car, and changing the globe, I decided to eliminate the problem of the "gear drive" release mechanism, by making a different end for the release rod that simply takes a 13mm spanner to turn and release. Problem solved :cool: (but not without some cursing )
View attachment 142634
View attachment 142642
View attachment 142650
View attachment 142658
View attachment 142706
Any chance you made more than one of those end bits for the rod? Would make my life a lot easier.
 
1 - 2 of 2 Posts
Top