Joined
·
463 Posts
I finally figured this out for our T2. A couple of steps were missing in the instructions and some posts.
We have a Chamberlain Garage Door Opener with rolling codes.
1. I cleared the old codes by pressing 1 and 3 for 20 seconds. A slower (1 flashing light per second) changed to a faster blinking light at (2 flashes per second)at 20 seconds.
2. I had to use the hand held remote first! Holding it near the button worked for me with a new battery. Pressed both the hand held remote and the #1 button simultaneously twice. The flashing light changed from slow flashing to the faster flashing. The Garage door did not open at this time.
3. I then pressed the "learn button" on the Chamberlain unit, walk back to the Touareg and pressed the #1 button once for 3 seconds (Fast flashing). The Chamberlain unit flashed the garage light one time. (Message received) I then pressed the #1 button again and the garage door closed!
I hope this helps!
Bill
We have a Chamberlain Garage Door Opener with rolling codes.
1. I cleared the old codes by pressing 1 and 3 for 20 seconds. A slower (1 flashing light per second) changed to a faster blinking light at (2 flashes per second)at 20 seconds.
2. I had to use the hand held remote first! Holding it near the button worked for me with a new battery. Pressed both the hand held remote and the #1 button simultaneously twice. The flashing light changed from slow flashing to the faster flashing. The Garage door did not open at this time.
3. I then pressed the "learn button" on the Chamberlain unit, walk back to the Touareg and pressed the #1 button once for 3 seconds (Fast flashing). The Chamberlain unit flashed the garage light one time. (Message received) I then pressed the #1 button again and the garage door closed!
I hope this helps!
Bill
