[scott_eh]

For anyone searching, thought I’d post my update as I ended up here as I was struggling through this. I had a leaky housing that would always fill with condensation. 2015 R Line. There’s a T25 torx holding the bottom of the black wheel well trim in place, take that off and pop the trim out to the side. Then it’s just clips holding the outer trim around the fog light housing. I tried from the thin side first (closest to front plate) but couldn’t get it. Ended up being easier from the thicker side (closer to the wheel) despite some overlapping clips. Just pop that trim out far enough to access the (4) T25 torx holding on the housing and then you’re good to go. Remember to take your fog light bulb out first though!! Which is accessed from behind, just a quarter turn to get it out.

 

[scott_eh]

Sorry for image duplicates… posting from cell phone (newb)