Club Touareg Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,727 Posts
Yes when the engine is idling, but as soon as the rpm is increased up to 2000 the top linkage starts moving and opening flaps inside the intake manifold, the bottom one is still not moving until you hit above 4000 rpm, you see that's the problem in some cases as you do not know if the rods are stuck or moving freely, you have to ask someone to start the car for you and see how it moves, but You can not increase the rpm over 4000 While in Park on Neutral so you cannot see if the bottom one moves as it should
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top