Hi everyone
A quite odd problem is starting to test my nerves! I have a 2006 T1 v6 tdi with both front seats electrically operated with memory.
The problem only manifests itself to the backrest adjust and not other directions (e.g. front to back or height) and on both seats.
This is hard to explain but here it goes:
If say, i memorise the backrest at 45 degree (not normal but just an example to make understanding easier) it will memorise with no trouble. if i move the backrest to 55 degree then press the memory button, it will come back to the memorised 45 degree position no problem. If i move the backrest to 35 degree then press the memory button, it will come back to just 40 degree!! I have to move to around 46 degree then press memory button again to come to the set 45 degree... it can happen vice-versa as well...
It seems that the backrest has about 4 dead digrees...???
Now i have checked the measuring blocks from vag com for the backrest movement and the sensors do measure accurately the position!
I would say is something about the memory recall that's causing this behaviour...
Strangest thing is that is not just isolated to the driver's seat, the passenger's backrest behaves exactly the same!
I really need some help on this problem since i do use the memory function quite a lot and it's getting on my nerves! Every time i move the backrest to a different position (i have a really bad back
) i press the "1" button and nothing happens!!!
Thanks in advance!
A quite odd problem is starting to test my nerves! I have a 2006 T1 v6 tdi with both front seats electrically operated with memory.
The problem only manifests itself to the backrest adjust and not other directions (e.g. front to back or height) and on both seats.
This is hard to explain but here it goes:
If say, i memorise the backrest at 45 degree (not normal but just an example to make understanding easier) it will memorise with no trouble. if i move the backrest to 55 degree then press the memory button, it will come back to the memorised 45 degree position no problem. If i move the backrest to 35 degree then press the memory button, it will come back to just 40 degree!! I have to move to around 46 degree then press memory button again to come to the set 45 degree... it can happen vice-versa as well...
It seems that the backrest has about 4 dead digrees...???
Now i have checked the measuring blocks from vag com for the backrest movement and the sensors do measure accurately the position!
I would say is something about the memory recall that's causing this behaviour...
Strangest thing is that is not just isolated to the driver's seat, the passenger's backrest behaves exactly the same!
I really need some help on this problem since i do use the memory function quite a lot and it's getting on my nerves! Every time i move the backrest to a different position (i have a really bad back
) i press the "1" button and nothing happens!!!Thanks in advance!
