Club Touareg Forum banner
1 - 4 of 4 Posts

lgibson

· Registered
Joined
·
1,394 Posts
Discussion starter · #1 ·
I have all the fasteners loose as well as the ball joints. Sort of in a quandry over the best procedure. Where would you begin? I am aware of the challenge r&ring the LCA ball joint in the knuckle. Perhaps it is best to remove the knuckle first, then the LCA?
Any advice appreciated.
 
I have all the fasteners loose as well as the ball joints. Sort of in a quandry over the best procedure. Where would you begin? I am aware of the challenge r&ring the LCA ball joint in the knuckle. Perhaps it is best to remove the knuckle first, then the LCA?
Any advice appreciated.
Check out the thread in the link below. It even has a nice video showing replacement of the UCA+LCA.

Link >>>> https://www.clubtouareg.com/threads...eplacement-diy.298322/?post_id=2144999&nested_view=1&sortby=oldest#post-2144999
 
Discussion starter · #3 ·
Thanks for that excellent video. Is there anything similiar for the steering knuckle replacement? And would you do the knuckle first or the LCA? The upper control arm is not being removed.
 
Thanks for that excellent video. Is there anything similiar for the steering knuckle replacement? And would you do the knuckle first or the LCA? The upper control arm is not being removed.
You'd have to thank who posted the video in that thread.
I did not look for a steering knuckle video or info on it.
If you use the "Search Community" feature at the top center of the page you can see if there are any threads on it.
 
1 - 4 of 4 Posts