Club Touareg Forum banner

T3 Factory alignment specs?

4K views 9 replies 4 participants last post by  chrisw 
#1 ·
Can anyone post the factory alignment specs? I am not looking for someone's current alignment, but the recommended factory settings from the service manuals.
 
#2 ·
I think that if you can find pictures that folk have posted of their alignment, the max/min specs of each of the elements are actually shown on the print out in order to show whether the actual numbers are within acceptable tolerances.
 
#4 ·
Any quality tire shop has the specs. My Just Tires print out says Volkswagen Touareg 2011 (7P). But, I can understand what you want...try your dealer.
 
#8 ·
Ah, okay, with more detail your enquiry becomes a lot clearer.

I suspect your only option may be to hire an hour on ErWIN if you cannot pry a printout from your local VW dealer.

https://erwin.vw.com/erwin/showHome.do
 
#9 ·
Try this ...​
Front axle Steel spring strut Air spring strut​
PR numbers 1BA/1BE 1BB 1BK/1BY 2MA​
Toe-in per wheel (individual toe)​
+5' ± 2.5'​
Maximum permissible difference​
between sides​
max. 5'​
Camber (in straight-ahead position)​
-15' ± 20'​
Maximum permissible difference​
between sides​
max. 20'​
Caster angel​
+8° 35' +10'/-30'​
+8° 26' +10'/-30'​
+8° 38' +10'/-30'​
+9° 5' +10'/-30'​
Maximum permissible difference between sides​
max. 30'​
Ride height 478 ± 10 mm 488 ± 10 mm 475 ± 10 mm 450 ± 10 mm​
Rear axle Steel spring strut Air spring strut​
PR numbers 1BA/1BE 1BB 1BK/1BY 2MA​
Toe-in per wheel (individual toe)​
+10' ± 5'​
Maximum permissible difference between sides​
max. 7'​
Camber -1° 20' ± 20'​
Maximum permissible difference between sides​
max. 20'​
Ride height 486 ± 10 mm 502 ± 10 mm 483 ± 10 mm 458 ± 10 mm
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top